• Handheld 3D scanner_AtlaScan 3D Blue Scanner
  • Handheld 3D scanner_AtlaScan 3D Blue Scanner
  • Handheld 3D scanner_AtlaScan 3D Blue Scanner
  • Handheld 3D scanner_AtlaScan 3D Blue Scanner

AtlaScan 3D Blue Scanner

AtlaScan 3D Blue Scanner is a new generation of revolutionary product. In addition to having the advantages of similar products on the market, the most prominent feature is that the equipment has been greatly upgraded in terms of software and hardware, and it gives a large scanning area. The features of AtlaScan 3D Blue Scanner include Ultra-fast scanning efficiency, ultra-high scanning accuracy and resolution, wide material adaptability. Theirs features help users to complete their work quickly when users face variously complex applications.

  1. Inquiry
  2. Prev
  3. Next

Product Feature

  • The accuracy and resolution of AtlaScan in the standard mode are both 0.02mm, and which in the fine mode are up to 0.01mm. The higher resolution can more truly get the details of the surface which workpiece is measured.
  • The volumetric accuracy is up to 0.02mm+0.03mm/m. If AtlaScan is combined with the photogrammetry system, its volumetric accuracy is up to 0.02mm+0.015mm/m.
  • Because AtlaScan has fast calibration procedures and well environmental adaptability, the scanning accuracy will not be affected by time of use and harsh environment.
  • The system is used instantly without any preparation procedures.
  • The numbers of target reflective markers are reduced by more than 50%, and they save the time for pasted and peeled off.
  • It adopts a newly upgraded industrial camera and light source system, and the measurement rate is up to 1,600,000times/s, and the single scanning area is up to 600 x 550mm. The actual modeling efficiency is about 2 times higher than that of 7 mainstream products in the market.
  • Use the efficient and stable USB3.0 interface to achieve the maximum rate of transmission, increase the scanning rate, and save scanning time.
  • Multifunctional 3D scanning: the black, highlight, and color surface can be scanned directly without any preprocessing. It can scan different sizes and surface patterns.
  • Multifunctional buttons interact with the software.
  • The intelligent scanning advisory light automatically changes color to remind you to adjust the scanning distance, when the scanning distance is too close or too far.
  • Be compatible with UG, POLYWORKS, SOLIDWORKS, GEOMAGIC STUDIO.
  • It is easy to operate and has a wide range of applications. It can scan in a narrow space and has no requirements for the working environment.
  • Data visualization: the computer will display the results synchronously when scanning, so that you can view the scanning status and effect.
  • Model comparison test: support creation of features, alignment, and comparison of design model and scanning model, and generate test reports with one click.
  • Intelligent scanning guide module: users only need to click the mouse to select different working conditions to easily configure the ideal scanning parameters, effectively reduce the threshold for use and improve equipment usage efficiency.
  • Free space coordinate system: users can customize the specification to create an independent space coordinate system.
  • One-click test report: according to the actual product, conduct different ways of alignment, measurement, comparison test, etc. Carry out the detection analysis of tolerance of form and position, and the test reports can be automatically produced.

Product Specification

Model AtlaScan
Scan mode Standard mode Fine mode
Measurement rate 1,600,000  times/s 900,000 times/s
Scanning area Up to 600×550mm
Laser source 26 blue laser lines + extra single blue laser line + extra 14 blue laser lines
Laser class Class II（eye-safe）
Resolution Up to 0.01mm
Accuracy Up to 0.02mm Up to 0.01mm
Volumetric accuracy 0.015+0.03mm/m --
Volumetric accuracy （with PhotoShot） 0.015+0.015mm/m --
HOLE ACCURACY Up to 0.02mm
HOLE VOLUMETRIC ACCURACY 0.015+0.03mm/m
HOLE VOLUMETRIC ACCURACY +PhotoShot 0.015+0.015mm/m
Stand-off distance 350mm 200mm
Depth of field 450mm(max 550mm) 200mm
Weight 0.95kg
Dimensions 310×147×80mm
Transport USB3.0
Working temperature -20~40℃
Working humidity(non-condensing) 10~90%
Output formats .stl,.obj,.asc,.ply,.txt,.xyz，customized
Compatible software 3D Systems（Geomagic Solutions）、InnovMetric Software（PolyWorks）
Dassault Systems（CATIV V5和SolidWorks）、PTC（PRO∕ENGINEER）
Autodesk（inventor、Alias、3ds max、Maya、Softimage）、Siemens（NX and Solid Edge）
Certifications VDI/VDE 2634-Part 3 Optical 3d-measuring Systems
ISO/IEC17025
EC Compliance (Electromagnetic Compatibility Directive, Low Voltage Directive)